PRODUCTS
Your First Choice for Collimator Needs
-
Manual Certified Units
-
Non-Certified Veterinarian Units
-
Portable Certified Units
-
Portable Non-Certified Veterinarian Units
-
Mobile Certified Units
-
High Throughput Clinical Application Units
-
Custom Units
-
Collimator Accessories and Add-ons
ALL COLLIMATOR FEATURES
OUR MANUAL PRODUCT LINE
OUR PORTABLE PRODUCT LINE
Collimare Features and Advantages:
-
12-24VDC or 24VAC
-
Highly Visible 25W LED Light Source
-
Light Output is Greater than 20 foot-candle at 40" SID
-
5.1 Minimum Edge Contrast Ratio
-
Adjustable Brightness
-
LED Can Run Continuously
-
-
Cross-Hair Lasers (Class 1 Lasers)
-
'SMART' LED/Laser Control
-
Light/Lasers - Button Press
-
Light Only - Hold Button for 1 Second
-
Lasers Only - Hold Button for 2 Seconds
-
-
Programmable On-Time
- Hold Button on Power-On
-
Each Laser Flash - 15 Seconds On Time
-
15 Seconds Intervals up to 120 Seconds
-
Release Button - Two Laser Flashes Indicates it has been Stored
-
Saved to Memory, Keeps the Stored On Time Even When Powered Off
-
Advanced LED Thermal Control
-
No Fan Required
-
Up to 12 Minutes of Continuous On Time
-
Automatically Dims LED Brightness, then Shuts off Light if Needed
-
Lasers will flash to indicate Thermal Safety Mode
-
-
External Light and Laser Adjustments
-
All Adjustments Can Be Made Without Taking off the Collimator Housing
-
-
Power Cord with 9 Pin Connector
-
Power Wires
-
External Table Lock Switch Option
-
External Remote Switch Option
-
-
25' Extension Cord with 9 Pin Connector
-
Fixed Collimator Mount
-
Swivel Tube Mount
-
Rotational Detents at 90 Degrees
-
-
Custom SID Tape Measure
-
Up to 72" SID
-
-
Size: 6" Height x 9" Length x 6" Width
-
Weighs less than 13 lbs
-
Additional Weight can be Added By Using Our Weight Kits
-
-
Immediate Factory Customer Support
-
Made in the USA
Manual Collimators:
CML-150-0001-C-H2
-
Internal Heavy Weight
-
Collimator Weighs Approximately 18 lbs
-
-
Direct Replacement For Heavier Collimators
-
Progeny
-
Eureka
-
Ralco
-
-
150 kVp Certified Collimator
-
Maximum Radiation Leakage:
-
150 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17"x 17" at 36" SID
-
CML-150-0001-C
-
150 kVp Certified Collimator
-
Maximum Radiation Leakage:
-
150 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17"x 17" at 36" SID
-
CML-125-0001-C
-
125 kVp Certified Collimator
-
Maximum Radiation Leakage:
-
125 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17"x 17" at 36" SID
-
CML-VET-0001-NC
-
Non-Certified Veterinarian Collimator
-
Veterinary units are still fully shielded and rated at 150kVp.
-
Maximum Radiation Leakage:
-
150 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17" x 17" at 36" SID
-
Portable Collimators:
CPL-125-0001-C
-
125 kVp Certified Portable Collimator
-
Maximum Radiation Leakage:
-
125 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17"x 17" at 36" SID
-
CPL-125-SR01-C
-
Source-Ray Portable Collimator
-
Maximum Radiation Leakage:
-
125 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17" x 17" at 36" SID
-
-
Contact Source-Ray for more information
CPL-125-MX01-C
-
MinXRay Portable Collimator
-
Maximum Radiation Leakage:
-
125 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17" x 17" at 36" SID
-
-
Contact MinXRay for more information
CPL-VET-0001-NC
-
Non-Certified Veterinarian Portable Collimator
-
Veterinary portables are still fully shielded and rated at 125kVp
-
Maximum Radiation Leakage:
-
125 kVp - 4mA
-
-
Minimum Inherent Filtration:
-
1.4mm AL Equivalent at 80 kVp
-
-
Film Coverage:
-
Continuously Variable 17" x 17" at 36" SID
-
CUSTOM COLLIMATORS
ACCESSORIES
COLLIMATOR LITERATURE
Custom Application Collimators
-
High Throughput Collimators
-
Greater than 150 kVp
-
-
Mobile Collimators
-
Compact Collimators
-
Unique Application Collimators
Contact Us Today For Your Custom Collimare Solution
Accessory and Add-Ons:
CML-13-0001 24VDC Power Supply with Cord
-
24VDC Power Supply with cord
CM-10-1001 Accessory Rail Kit
-
Easily Mounts to the Underside of the Collimator Housing
-
Includes Installation Instructions, Hardware, and Adhesive
CM-10-1002 DAP Meter Rail Kit
-
Allows for DAP Meters to be Directly Installed to the Collimator
-
Easily Mounts to the Underside of the Collimator Housing
-
Includes Installation Instructions, Hardware, and Adhesive
CM-11-0122 External Weight Kit
-
Adds on Approximately 4 lbs per Kit
-
One Kit can be Installed to the Back of the Collimator
-
Two kits can be Installed to the Sides of the Collimator
-
Includes Installation Instructions and Hardware